DAAB Operators

When Commercial applications require a robust solution for heavy duty requirements, if effected by strong wind or heavy weight issues the DAAB range of operators becomes the most usable option

DAAB Automation is dedicated to the development and manufacture of high class drive systems for gates, doors and barriers”. there prime focus is to produce high quality products along with an ethos of continuing development and renewal. a philosophy they have continued since the company was founded at the middle of the 1970’s.

We know it – inside and out

The Operators professionally installed by DAAB approved installers such as the Portico Security Group Ltd companies. Originally designed to endure and function in the harsh Scandinavian environment. Design simplicity coupled with robust construction leads to a minimum amount of maintenance. In order to increase our customers’ confidence we are always willing to use our experience and share our knowledge. We are often asked to adapt the drive systems to suit a difficult situation.

We are also able to help as a problem solver, with solutions for simple parking problems to prison security.

DAAB MT

Our smallest drive unit with an oil filled gearbox. Suitable for domestic gates and smaller industrial gates. Plastic cover and silumin alloy base. The cover is also available in stainless steel, at additional cost. Fits swing gates up to max 3.50 metres per leaf.

DAAB’s MT drive units provide a more economical alternative for smaller gates and folding doors.
These drive units are available with both stainless steel and plastic covers.
MT with plastic cover MT installed on a folding door

The drive arms are available in many types and sizes to suit most gate or folding door applications.
The manual release mechanism is either a threaded pin for gates or a quick release for doors. Both typesare lockable.

The drive arm linkage protects the gearbox in the event of accidental collision damage.

MOTOR – 3 PHASE 220-240/380-415V. ↓ show more detail ↓

All gearbox shafts run on ball journals. This worm gear system is ‘self-locking’ and lubricated by synthetic oil capable of operating in temperatures as low as – 45.

More suitable for very wide openings

 

 

DAAB MK

Our most popular drive unit, with an oil filled gearbox. A highly reliable model manufactured in large volumes with a plastic cover and silumin alloy base. The cover is also available in cast silumin alloy or stainless steel at additional cost. Fits swing gates up to max 6.00 metres per leaf.

DAAB MA

Same as MK but with open gear (must be lubricated frequently). Suitable for gates with a low opening/closing rate, eg gates stay open all day. Otherwise same as MK.
Drive Unit type MK/MA for Swing Gates and Folding Door

DAAB’s MK/MA drive units open and close over 10,000 gates and doors from Svalbard in the North to Angola in the South. These drive units are used throughout Industry and Commerce, and for Prison and Military security. The MK drive is designed and built to cope with the hardest
conditions. The oil filled gearbox guarantees reliable, long term, maintenance free service.
MK/MA with cast aluminium baseplate and plastic cover. MK/MA with galvanised steel baseplate and stainless steel cover. The oil filled gearbox in the MK drive requires no maintenance.
For gates/doors with lower frequency use the MA drive offers an economical solution.
Drive arms are available in many types and sizes. Alternative mountings for different post sizes.
The manual release mechanism is either a threaded pin for gates or a quick release for doors. Both types are lockable. The drive arm linkage protects the gearbox in the event of accidental collision damage. The speed and torqueare easily adjusted by changing the drive pulleys

MOTOR – 3 PHASE 220-240/380-415V.

The construction, output, and insulation are in accordance with 1S0 Standard IEC 34-1 and 72 and Swedish standards SS 4260101 & SS 4260102.

The casing, stator and bearing housings are made from aluminium alloy. There is a built in motor protection device TWO STAGE OIL FILLED WORM GEAR BOX TYPE MK.
Aluminium casing. The worm wheel is made from a special bronze material and the teeth are machine cut to very high degree of accuracy. The worm gears are made of high quality alloy steel, and the helical teeth are precision ground on modern CNC machines. All gearbox shafts run on ball journals. This worm gear system is ‘self-locking’ and lubricated by synthetic oil capable of operating in temperatures as low as – 45°C. TWO STAGE OPEN WORM GEAR BOX TYPE MA. Similar design to type MK with gears made from aluminium bronze. This worm gear system is ’self locking’ and dry lubricated

Some users of DAAB products.

Great Britain

ABB Tubelines SAAB
AGA Royal Mail SAS
Alcatel GlaxoSmithKline Securities
British Telecom Flygt SKF
Danish National bank Hoechst Stena
Dover Harbour ASDA Swedish Radio
Embassy of Angola Proctor & Gamble Thule
Embassy of China Falköping Firestation Volvo
Embassy of Neatherland BMW UK National Grid
Embassy of Japan Westland Helicopters Royal Air Force
Embassy of Norway Halifax Building Elmo Calf
Embassy ofSweden London Undergroun Ltd Andos Chemical
BNFL Magnox Ford Motorcompany IKEA
Ericsson Mobil Oil M.O.D.
ESAB

All of these Police Authorities Metropolitan, Thames Valley, Derbyshire, Nottinghamshire, Somerset & Avon.

Other countries
Danish National bank Svalbard Airport Norwegian embassy, Budapest
Gardemoen Airport Tobaksmonopolet Norway Swedish embassy, Angola
OS-village in Lillehammer WORLD CHAMPIONSHIP
Hockeyarena in Helsinki
Ringnes brewery